Z-systems z-Q2 User Manual

z-q2 operations manualIntroductionZ-Systems model z-q2 6-band digital equalizer is based on the highly-successful model z-q1. For those who are famili

An Invitation to YouAfter you have used your Z-Systems product for a while, call, fax or email us and tell us what you think. We enjoy hearing from yo

z-q2 OperationConnect AC power of the proper voltage range with an IEC power cord to the back of the z-q2. If in doubt, verify the internal power sele

However, the ear can easily hear signal as much as 20 dB or better below the wideband noise level, depending on the frequency and masking. That’s why

midi #06 read noTo change the midi channel, rotate the first knob. The channel is preserved in non-volatile memory at power down.SYSEX read

and all equalization and gains are set to 0 dB, the system remains perfectly bit transparent, since its MS encoder and decoder are exactly symmetrical

which should look like this:a=35 b=49 loadThere are two nonvolatile memory “spaces”, labelled a and b, which can be compared. Rotate the left

gainPress the gain button (the LED next to the gain button illuminates) and see this screen:G +00.0 L +00.0 R +00.0Adjust the overall gain to avoid

asterisks in the S(tereo) display, for example:S +00.1* 56 Hz*An asterisk indicates that there is a different setting between the left and right ch

dB increments from 3 dB to 12 dB (gain or loss), 1 dB increments from -12 dB to -20 dB, 2 dB increments from -20 to -50 dB, 3 dB increments from -50 t